歡迎鑫淼硅膠科技有限公司！
全國咨詢熱線
全國咨詢熱線
手機：13823613629
電話：0769-82937713
q q ： 425675360
地址：東莞市常平鎮橋?yàn)r村利氏工業區C10廠房一樓
In the production of re-silicone rubber products, according to the difference of process and equipment, it can be divided into two main categories: moulding and injection moulding. Molding method: the process of directly loading rubber or pre-formed semi-finished products into the die cavity, then pressing on the machine and heating vulcanization at the same time, so as to obtain the parts of the product. Its production process is as follows: rubber - shear weighing or other pre-forming - filling die cavity - pressurization, vulcanization - starting pick-up - repairing flash - finished product quality inspection. The method of moulding is widely used because the moulding die structure and the equipment used are relatively simple and versatile.
In the production of re-silicone rubber products, according to the difference of process and equipment, it can be divided into two main categories: moulding and injection moulding. Molding method: the process of directly loading rubber or pre-formed semi-finished products into the die cavity, then pressing on the machine and heating vulcanization at the same time, so as to obtain the parts of the product. Its production process is as follows: rubber - shear weighing or other pre-forming - filling die cavity - pressurization, vulcanization - starting pick-up - repairing flash - finished product quality inspection. The method of moulding is widely used because the moulding die structure and the equipment used are relatively simple and versatile.
移印硅膠成為膠頭的“非凡過程”2021-08-12翻模硅膠硬度打樣，硬度不對2021-05-20檢驗硅油是否導致硅膠冒油的“兇手”2021-05-07白色縮合型膠與半透明縮合型膠的異同點2021-03-01液體硅膠一點雜質都不存在，現實嗎？2020-09-17液體硅膠硬度調節方法2020-08-31仰制翻模硅膠縮水率的小妙招2020-08-14高透型環氧樹脂滴膠與液體膠的迥異2020-08-13
